FILA MP90 EXTREME ECO WATER BASED IMPREGNATING SEALER
£46.99
FILA MP90 Extreme Eco-Compatible Water- and Oil-Repellent Protection – 1 Litre
This eco-friendly protective treatment offers superior water- and oil-repellent performance while preserving the natural appearance of the surface. Ideal for porcelain tiles, natural stone, marble, and granite with polished, brushed, or matt honed finishes, it reduces absorption without altering the material’s look. It waterproofs, protects, and makes cleaning easier, and is also suitable for joints, ceramic, crackle-effect surfaces, grit, resin-marble, and stone slabs. Additionally, it can be used on coloured concrete tiles and reconstructed stones. With built-in anti-graffiti properties, it prevents paint from bonding to surfaces, allowing for quick and easy graffiti removal.
- 30 days easy returns
- VAT Included
FILA MP90 EXTREME ECO-COMPATIBLE WATER- AND OIL-REPELLENT PROTECTION – 1 Litre
WHAT’S IT FOR
- Water- and oil-repellent with natural effect.
- The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt honed finishes.
- Reduces absorption without affecting the material\’s natural look.
- It waterproofs, protects and facilitates cleaning.
- It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin-marble, and stone slabs.
- Is also suitable for treating coloured concrete tiles and reconstructed stones.
- It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.
- Water- and oil-repellent: it hampers the absorption of common watery and oily stains.
ADVANTAGES
- THIS PRODUCT HAS EXTREMELY LOW VOC EMISSIONS: CERTIFIED BY GEV AND MARKED EC1PLUS.
- CONTRIBUTES TOWARDS LEED CREDITS.
- HYDROCARBON SOLVENT FREE: ENVIRONMENTALLY-FRIENDLY TREATMENT.
- DUE TO ITS WATER-BASE, IT WITHSTANDS RESIDUAL HUMIDITY AND CAN THEREFORE BE APPLIED 24-48 HOURS AFTER THE INITIAL WASH, MAKING TREATMENT QUICKER.
- SINGLE-COAT APPLICATION: APPLY AND RUB IN GENTLY UNTIL COMPLETELY ABSORBED.
- DOES NOT FORM SURFACE FILM AND DOES NOT YELLOW.
- IT IS IDEALLY SUITED FOR PROTECTING KITCHEN AND BATHROOM TOPS.
- THE SURFACE CAN BE WALKED ON AFTER JUST 2 HOURS*.
- THE TREATED SURFACES ARE SUITABLE FOR FOOD CONTACT.
METHOD OF USE
No dilution required: ready to use.
Application: Shake before use.
For materials with matt finish (natural stone, terracotta, agglomerates, concrete tiles):Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well.Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.For polished porcelain tiles, natural stone, agglomerates with glossy finish:Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad.Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc floor scrubber.To complete the cycle with the finish:
COVERAGE
APPROXIMATE COVERAGE (1 litre):
- polished porcelain tiles30-50 m2
- Polished Marble/Granite20-30 m2
- Matte honed stone10-20 m2
*PLEASE NOTE*
Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.